Programming a LiftMaster Garage Door Remote

If you are having issues with your remotes not opening your garage door, it could be a simple fix such as replacing the battery, or reprogramming your remote to the operator. If you have replaced the battery and are still having issues, you may need to reprogram the remote. While different brands have different instructions, below are some steps you can take for a LiftMaster Garage Door Operator.

‍

To program a LiftMaster remote to a garage door operator, you can try these steps:

1. Locate the Learn button on the garage door opener, which is usually on the same side as the antenna. The button may be a different color, such as green, orange, red, purple, or yellow, and may have a small LED next to it. You might need to remove the light lens to access it.
2. Press and release the Learn button.
3. Within 30 seconds, press and hold the button you want to program on the remote for three seconds, then release.
4. The LED indicator light should turn off or the garage door operator lights should blink to indicate that programming was successful. You can also try listening for two clicks.
5. Test the remote.

‍

If you are still having issues with the remote after completing these steps, a service call may be needed to determine if it's a more significant issue.

‍

‍